A - 3
Appendix
A
Behaviour in the event of faults
Fault
Possible causes
Remedy
Programming of
Reset the telecommunications system
telecommunications
system unclear
Reset the telecommunications system to the
as-delivered state and reprogram
No dialling tone on
Power failure
Check mains connection, fuses
lifting the handset
Defective terminal
Check terminal at another connection
Defective installation
Check the terminals in the socket and on the
telecommunications system
No internal calls
Do not disturb switched on
Switch off do not disturb
are received
(special dialling tone)
Diversion to another
Switch off diversion
telephone (internal/external)
(special dialling tone)
No external calls
Wrong MSN entered
Enter right MSN, delete all if necessary
are received
MSN – internal subscriber
Assign internal subscriber to the MSN
assignment missing
(ringing assignment)
Do not disturb switched on
Switch off do not disturb
(special dialling tone)
Diversion to another
Switch off diversion
telephone (internal/external)
(special dialling tone)
ISDN call forwarding is active
Deactivate ISDN call forwarding
No outgoing external No authorisation
Check authorisation, access to ISDN network,
connection possible
programmed
assignment of barred numbers
Cost limit reached
Inform system administrator
Transfer of external
The refer back key
r
on the
Set the telephone to DTMF (tone dialling) and the
call (refer back) not
telephone is set as an earth
refer back key to flash
possible
key
Incorrect flash time
Set the flash time on the telephone or on the
telecommunications system for the terminal
connection concerned
Summary of Contents for AC 14 analog
Page 1: ...AC 14 communication with Operating Manual ISDN PBX a system...
Page 2: ...I 2 Introduction...
Page 12: ...S 6 Set up...
Page 67: ...K 5 Key words K...