DirectCommand
Installation
Apache AS715/1010/1210 (MY 2009-2010)
Ag Leader Technology
PN: 2005943 Rev. D
December 2013
Page 7 of 13
Display Mounting Rail
6.
Mount the Display in a convenient place for operation, but out of
the operator’s line of sight while operating the sprayer.
Installing
the Cab
Cabling and
Auxiliary
Input
Module
Parts required for procedure:
From Direct Command Kit:
•
(1) Apache Switchbox Adapter
PN: 4001615
•
(1) Power Cable
PN: 4002016-5
From Auxiliary Input Module Kit:
•
(1) Deutsch Dust Plug – 6-pin
PN: 2002899-6
•
(1) CAN Y-Splice
PN: 4000137
•
(1) CAN Bus Stub – 1 ft.
PN: 4000219-1
•
(1) Auxiliary input Module
PN: 4000437
From Display Kit or Display Cable Kit 4100814
•
(1) Power Control Relay
PN: 4000708-1
•
(1) Display Cable
PN: 4001608-12
Step-by-Step for
Installing the
Cab Cabling and
Auxiliary Input
Module
1.
Mount the Auxiliary Input Module, PN: 4000437, behind the
operators seat.
NOTE: Make sure to leave enough room for routing
cables avoiding any pinch points.
2.
Connect the round 28-pin connector on the Display Cable, PN:
4001608-12, to the connector on the back of the InSight or EDGE
Display, or the connector labeled
MAIN
on the back of the
Ag Leader INTEGRA display.
