DirectCommand
Installation
Apache AS715/1010/1210 (MY 2009-2010)
Ag Leader Technology
PN: 2005943 Rev. D
December 2013
Page 9 of 13
“AUXILIARY INPUT MODULE” into the Auxiliary Input Module
receptacle labeled
SWITCH B.
11. Connect the brown plug labeled “APACHE” on the Switchbox
Adapter Cable into the machine harness.
12. Use the Deutsch 6-Pin Dust Plug, PN: 2002899-6, to fill the
empty receptacle labeled
RADAR
on the Auxiliary Input Module.
NOTE: If a backup radar or wheel speed sensor has been
installed on the machine, contact your Ag Leader Dealer
for the appropriate cabling to connect the Radar to the
Auxiliary Input Module
13. Locate the Power Studs in the cab shown in the figure above.
Connect the fused wires from the Power Cable, PN: 4002016-5
to the Positive Terminal, and the black wires to the Negative
Terminal.
14. Route the opposite end of the Power Cable towards the Auxiliary
Input Module. Connect the 3-pin Weatherpack Tower of the
Power Cable to the mating connector on the Display Cable.
