Ag Leader Technology
DirectCommand
Installation
Apache AS715/1010/1210 (MY 2009-2010)
Page 8 of 13
December 2013
PN: 2005943
Rev. D
3.
Route the opposite end of the Display Cable towards the
Auxiliary Input Module.
4.
Connect the Power Control Relay, PN: 4000708-1, to the Display
Cable at the black 4-pin Weatherpack Connector.
5.
Connect the single end of the CAN Y-Splice, PN: 4000137, from
the Auxiliary Input Module Kit to the mating connector on the
Display Cable.
6.
Connect the Round 4-pin plug of the CAN Bus Stub – 1 ft. PN:
4000219-1 into the gray side of the CAN Y-Splice.
7.
Connect the opposite end of the CAN Bus Stub into the mating
receptacle on the Auxiliary Input Module labeled
CAN BUS
.
8.
Disconnect both connectors on the factory Switchbox from the
machine harness. Connect the green plug from the Switchbox
into the mating connector on the Auxiliary Input Module labeled
SWITCH A.
Electrical connections behind seat and console
9.
Connect the brown plug from the switchbox into the brown
receptacle on the Switchbox Adapter Cable PN: 4001615.
10. Plug the brown plug on the Switchbox Adapter Cable labeled
