Ag Leader Technology
Cotton Picker Installation
CaseIH 2055
November 2002
2006200-1
9-11
14-1/4 inch
Measurement
Installing Hood
Adapters
Part required for this procedure:
•
Sensor Install Kit
•
9/32 in. drill bit
•
Electric drill or hand punch
Step-by-Step
Procedure
1. Remove the double outer hoods from the picker by loosening the four nuts
holding the hood and chute together.
2. From the bottom of all four sides, measure up 14-1/4 inches and mark. Ensure
the bottom of the chute is square and not bent.
3. With a square, extend the marks around the chute. This identifies the section of
the chute to be removed. See Figure 11.
Figure 11. 14-1/4 inch measurement on chute.
