1
IMPORTANT!
BEFORE INSTALLATION
These instructions describe the installation, operation and maintenance procedures for the
Image-Vet 70ACP veterinary X-ray system. One purpose of this manual is to provide the user with
instructions that will permit the equipment to run safely and efficiently. The Image-Vet 70ACP must
be used according to the procedures in the manual and never for purposes other than the ones
for which it has been designed. Please read the operation instructions, Section A of this manual
in its entirety before attempting to take any radiographs of a patient. The Image-Vet 70ACP is
intended solely for veterinary applications and for use by a qualified and licensed veterinarian or
technician. These instructions apply to all the versions of the Image-Vet 70ACP X-ray equipment
as well as various accessories that may be provided. For this reason, the description of some
parts may not correspond or be applicable to your equipment.
The manufacturer or its representative shall provide authorized service to meet the stated
performance standard information as required for the timer or tubehead.
No part of this manual may be reproduced, stored in a retrieval system or transmitted in any form
or by any means, I.E. electronic, mechanical, photocopying, translation, or otherwise, without the
prior written permission of AFP Imaging Corp., © AFP Imaging Corporation, 2007.
All information, specifications and illustrations contained herein are subject to change.
AFP Imaging Corp. has a company policy of continual development. Therefore, it reserves the
right to make changes without prior notice.
AFP’s limited warranty obligations apply to, but are not limited by the following conditions:
1)
Damage incurred due to improper wiring or connections are excluded.
2)
The installation must be carried out by authorized personnel.
3)
The installation must be completed in accordance with the diagrams supplied by
the manufacturer.
4)
An independent earth ground wire is required for electrical safety with main power input
wiring.
Important: An electrical source must be provided with + or - 3%
regulation which includes a fuse or circuit breaker rated for 120/220 VAC,
15 Amps.
Summary of Contents for IMAGE-VET 70 ACP
Page 2: ......
Page 16: ...14 Typical Wall Mounting Typical Mobile Mounting ...
