November 29, 1999
INSTALLING OPTIONAL UNITS
3-23
Installation
4. Attach bracket [F] (1 screw) to the interface
board [G] as shown.
NOTE: Be sure to tighten the screw only
temporarily at this moment.
5. Attach the interface board assembly [H] to the
machine (1 screw), then tighten all screws. After
that, attach the bracket [I] (2 screws) as shown.
Then replace the operation panel.
6. Run the cable through the bracket, then
connect it to the interface board assembly [J].
Attach the DIU board assembly [K] to the
machine (2 screws).
H144I504.WMF
H144I505.WMF
H144I506.WMF
[F]
[G]
[H]
[K]
[J]
[I]