BIT SWITCHES
November 29, 1999
4-50
Communication Switch 18
No
FUNCTION
COMMENTS
0
to
7
Interval for which the machine
does not access the PC after a
job
01 to FF (Hex), unit = 2 s
(e.g. 0C(H) = 24 s)
00 (Hex): 1 s
FF (Hex): 510 s
In some cases with PC-fax communication, the
machine will stall if this interval is too short.
Communication Switch 19 - Not used (do not change any of these settings)
Communication Switch 1A - Not used (do not change any of these settings)
Communication Switch 1B
No
FUNCTION
COMMENTS
0
to
7
Extension access code (0 to 7)
to turn V.8 protocol On/Off
0: On
1: Off
If the PABX does not support V.8/V.34 protocol
procedure, set the appropriate bit to “1” to
disable V.8.
Example: If “0” is the PSTN access code, set bit
0 to 1. When the machine detects “0” as the first
dialed number, it automatically disables V.8
protocol. (Alternatively, if “3” is the PSTN access
code, set bit 3 to 1.)
Communication Switch 1C
No
FUNCTION
COMMENTS
0-1
Extension access code (8 and
9) to turn V.8 protocol On/Off
0: On
1: Off
Refer to communication switch 1B.
Example: If “8” is the PSTN access code, set bit
0 to 1. When the machine detects “8” as the first
dialed number, it automatically disables V.8
protocol. (If “9” is the PSTN access code, use bit
1.)
2-7
Not used
Do not change the settings.
Communication Switch 1D - Not used (do not change any of these settings)
Communication Switch 1E - Not used (do not change any of these settings)
Communication Switch 1F - Not used (do not change any of these settings)
