November 29, 1999
PRINTER
2-25
Detailed
Descriptions
By-pass Tray (Printer I/F Unit Required)
When the registration sensor [A] turns on
after paper is set on the by-pass tray [B],
the paper is fed and held by the
registration roller to ensure that it does not
fall from the tray. If the paper is left at the
tray for more than one minute (default), the
paper will be fed through the machine and
exited as a blank sheet. This one-minute
interval can be adjusted by changing bits 0
and 1 of system switch 0B (this is the ‘auto
reset timer’).
NOTE: If the printer interface unit is not
installed, the by-pass tray cannot
be used.
If there is any paper on the by-
pass tray, received fax data goes
into SAF memory.
Jam Detection
1. Paper non-feed at the standard tray (error code 9-07).
•
If the registration sensor does not turn on within two seconds after the paper
feed clutch starts.
•
If the registration sensor is already on when the paper is fed from the tray.
2. Registration jam (error code 9-08):
•
If the registration sensor does not turn off within a fixed time period after laser
exposure has begun. This interval ranges from 2.0 to 4.9 seconds,
depending on the paper size.
•
If the paper exit sensor does not turn on within a fixed time period after laser
exposure has begun. This interval ranges from 2.5 to 5.1 seconds,
depending on the paper size.
•
If the paper set in the bypass tray is removed just prior to printing.
3. Exit jam (error code 9-09):
•
If the paper exit sensor does not turn off within a fixed time period after laser
exposure has begun. This interval ranges from 2.0 to 4.9 seconds,
depending on the paper size.
H306D518.WMF
[A]
[B]
