manualshive.com logo in svg

Aficio 2404WD, Operating Instructions Manual, Page: 82 / 92

Share
Download
Aficio 2404WD Operating Instructions Manual Download Page 82

Remarks

76

7

❒

Do not take off the holding stand.

❒

Protect the machine from strong shocks. Impact can damage the hard disk
and cause stored files to be lost. As a precautionary measure, files should be
copied to another computer.

Note

❒

For details about how to turn the main power off, see “Turning On the Pow-
er”, About This Machine.

Reference

“Turning On the Power”, About This Machine

Optimum environmental conditions

The following describes precautions when locating the machine.

R

 

CAUTION:

R

 

CAUTION:

R

 

CAUTION:

• Temperature: 10 - 30 

°

C (50 - 86 

°

F)

• Humidity: 15 - 90%
• A strong and level base.
• The machine must be level within 5 mm, 0.2 inches: both front to rear and left

to right.

• To avoid possible buildup of ozone, make sure to locate this machine in a large

well ventilated room that has an air turnover of more than 30 m

3

/hr/person.

•

Keep the machine away from humidity and dust. Otherwise a fire or an elec-
tric shock might occur.

•

Do not place the machine on an unstable or tilted surface. If it topples over, 
an injury might occur.

•

After you move the machine, use the caster fixture to fix it in place. Other-
wise the machine might move or come down to cause an injury.

•

Make sure the room where you are using the machine is well ventilated and 
spacious. Good ventilation is especially important when the machine is used 
heavily.

Summary of Contents for 2404WD





























































































Reviews:

No comments