
57
5. Adding Paper and Toner
This chapter explains troubleshooting procedures that are applicable to all the
machine's functions.
Loading Paper
This section explains what to do when paper runs out and needs reloading.
R
CAUTION:
R
CAUTION:
R
CAUTION:
R
CAUTION:
Important
❒
When removing paper rolls, lift the paper holders on either side of the paper
roll before removing. Do not lift one side only. This could damage the machine.
•
Be careful when replacing the roll paper or removing misfed paper by follow-
ing the operating instructions properly. Otherwise, an injury may result from
the paper cutter inside.
•
The fusing section of this machine might be very hot. Caution should be tak-
en when removing misfed paper.
•
When replacing or loading the paper roll, do not put the paper roll on the upper
of the paper roll tray. Otherwise the tray may fall and an injury may result.
•
Hold the paper rolls horizontally with both hands. When you grab the paper
holder and hold the paper roll vertically, the paper roll may fall off and an in-
jury may result.
•
When replacing or loading the paper, or clearing paper jams, pull out the cut
paper tray slowly with both hands. Do not pull out the cut paper tray with a
single hand. Otherwise the rear of the cut paper tray may fall and an injury
may result.
ATJ012S
Summary of Contents for 2404WD
