7
Note: U
se “Painter’s Tape” to apply a protective guard around the work areas (fender and
Front bumper fascia). This will help protect the paint and finish of your vehicle.
8.
Disconnect the four (4) clips for the wheel arch moldings. Squeeze the clip from inside the
fender to get them to release easier.
Summary of Contents for 79-21007L
Page 3: ...2 ...
Page 14: ...13 15 Remove and discard the two 2 nuts from the supplied 20 single row LED light ...
Page 23: ...22 28 Reinstall the twelve 12 screws into the core support removed in Step 4 and tighten ...
Page 25: ...24 32 Remove all the painter s tape if any was applied 33 Installation is now complete ...