![background image](http://html.mh-extra.com/html/afe-power/79-21007l/79-21007l_instruction-manual_2864079009.webp)
8
Note: Please go slow and use extreme caution while performing the following steps.
Note: U
se “Painter’s Tape” to apply a protective guard around the work areas (fender and
Front bumper fascia). This will help protect the paint and finish of your vehicle.
9.
Using a plastic prying tool, carefully separate the front bumper fascia from the fender. After
separating the fender from the bumper fascia, gently pull the bumper fascia and remove it
from the headlight and the grille. Save for reinstallation.
10.
Repeat Step 9 on the opposite side of the vehicle.
Summary of Contents for 79-21007L
Page 3: ...2 ...
Page 14: ...13 15 Remove and discard the two 2 nuts from the supplied 20 single row LED light ...
Page 23: ...22 28 Reinstall the twelve 12 screws into the core support removed in Step 4 and tighten ...
Page 25: ...24 32 Remove all the painter s tape if any was applied 33 Installation is now complete ...