15
18.
Install the factory inner grille onto the aFe Scorpion grille. The studs on the aFe Scorpion
grille come through the open locations where the outer grille was clipped. Push the factory
grille over the studs. Install the eight (8) supplied “C” brackets ont
o the studs. Install the
eight (8) supplied #10-32 nylon lock nuts onto the studs. Before tightening the #10-32 nylon
lock nuts, center the grille.
Summary of Contents for 79-21007L
Page 3: ...2 ...
Page 14: ...13 15 Remove and discard the two 2 nuts from the supplied 20 single row LED light ...
Page 23: ...22 28 Reinstall the twelve 12 screws into the core support removed in Step 4 and tighten ...
Page 25: ...24 32 Remove all the painter s tape if any was applied 33 Installation is now complete ...