3
Note: Before you begin, use “Painter’s Tape” to apply a protective guard around the work
areas (fender and bumper valance). This will help protect the paint and finish of your vehicle.
1.
Disconnect the negative battery terminal.
2.
Locate twelve (12) plastic clips on top of plastic radiator cover. Carefully pry the pins out to
remove and then set aside. Save all parts for reinstallation.
3.
Remove the plastic radiator cover. Set it aside for reinstallation.
Summary of Contents for 79-21007L
Page 3: ...2 ...
Page 14: ...13 15 Remove and discard the two 2 nuts from the supplied 20 single row LED light ...
Page 23: ...22 28 Reinstall the twelve 12 screws into the core support removed in Step 4 and tighten ...
Page 25: ...24 32 Remove all the painter s tape if any was applied 33 Installation is now complete ...