Decommissioning, disassembly, disposal
Assembly instructions EN
CR 25 / CR 32
Edition 01/2020
Rev. 4.0
51–56
10 Decommissioning, disassembly, disposal
The rotary modules must be properly dismantled after use and disposed of in
an environmentally friendly manner.
10.1 Safety instructions for decommissioning, disassembling and disposal
Also observe the safety instructions in
chap. 2 „Safety instructions“ in this
manual.
10.2 Decommissioning
If the rotary modules are not used for a longer period of time, they must be
properly commissioned and stored as described in
chapter 4.5.
10.3 Disassembly
The rotary modules may only be dismounted by qualified personnel.
WARNING
Risk of injury due to improper decommissioning, disassembly and
disposal!
Improperly carried out activities can result in considerable material damage
and serious injury.
The operator must exercise due care and only use specially trained and
qualified personnel for this work.
CAUTION
Risk of injury due to uncontrolled movements of the rotary modules!
When disassembling the rotary modules from a system, there is a danger of
uncontrolled movements. If pneumatic connections are disconnected under
pressure, serious bodily injury may result.
Disconnect the media supply (electrics, pneumatics) before removing the
rotary modules!
Disassembling should only be carried out by qualified personnel!
Only remove the rotary module when the control unit is switched off and
secured!
