General
8 – 56
Assembly instructions EN
CR 25 / CR 32
Edition 01/2020
Rev. 4.0
1.3 Additional symbols
In these assembly instructions the following symbols are used to highlight
instructions, results, references, etc.
Symbol
Description
1.
Instructions (steps ...)
Results of actions
References to sections
Enumerations not ordered
1.4 Applicable documents
In addition to the assembly instructions, the following documents must be
observed:
Safety data sheets etc.
Instructions for integrated components (
supplier documentation)
Each rotary module is accompanied by a safety information sheet. This
information sheet must be read carefully by every person who carries out work
on and with the rotary module.
1.5 Warranty
The warranty terms for Afag handling components and handling systems are
the following:
24 months from initial operation and up to a maximum of 27 months from
delivery.
Wear parts (e.g. shock absorbers) are excluded from the warranty.*
The warranty covers the replacement or repair of defective Afag parts. Further
claims are excluded.
* However, a customer has a right to a defect-free product. This does also
apply to defective accessories and wear parts. Normal wear and tear is
excluded from the warranty.
The warranty shall expire in the following cases:
Improper use of the module
Non-observance of the instructions regarding assembly, commissioning,
operation and maintenance of the module
Improper assembly, commissioning, operation and maintenance
Repairs and design changes carried out without prior technical instructions
of Afag Automation AG
