Technical data
18 – 56
Assembly instructions EN
CR 25 / CR 32
Edition 01/2020
Rev. 4.0
3.1.2 Technical data CR 25
CR 25
Attachment grid
96 mm
Attachment grid alternative
60 mm
Attachment thread
M10 pass-thr. - M12 f. bottom
Attachment thread alternative
M8
Operating pressure
6 +/- 2 bar
Air connection P
G 1/8’’
Operating temperature
0 – 50 °C
Storage temperature
0 – 50 °C
Air humidity
< 90 %
Medium filtered compressed air
10 – 40
μm
Type
CR 25
Order Number
50254300
Net weight
3.28 kg
Air consumption (180°)
0.389 NL
Angle of rotation
0-180°
Min. swivel time 180°
0.44 s
Noise level
54 dB(A)
Electrical feed-through
4 x 1 A
Rotary supply fluids
4
Angle accuracy
+/- 0.05°
Torque*
6.2 Nm
Max. mass moment of inertia
(observe swivel time diagram)
*4000 kg/cm
2
Positions
2
Mounting position
Fig. 2
Table technical data CR 25
* In the end position, only half the torque is achieved, since in this position the
pressure is exerted by one piston only (
chapter 5.4
The technical data refer to a nominal pressure of 6 bar and the Afag standard
test conditions.
Note: If a torque acts against the direction of rotation in the end position,
select a drive with twice the theoretical torque.
The rotary module can be operated with both oil-free and oiled compressed-
air. Change from oil-free to oil-lubricated allowed but not vice versa.
Cleanroom class ISO 14644-1.