Installation, assembly & setting
Assembly instructions EN
CR 25 / CR 32
Edition 01/2020
Rev. 4.0
41–56
6.3.2 Adjusting the angle of rotation
Fig. 19
Example illustration
1. Shock absorber
5. Clamping screw
2. Lock nut
6. Rotary flange
3. Seal
7. Compr. air connection P1 (counterclockwise)
4. Stop sleeve
8. Compressed air connection P2 (clockwise)
Angle of rotation
Maximum rotation angle = 200°
On all modules the hole patterns of the
flange are set to 0° position. The flange
thus turns 100° to the left and 100° to the
right.
Reduction of the angle of rotation
The end positions can be reduced by max. 100°
starting from the 0° or 200° position.
1.
Fixation by screwing in the corresponding stop
screw.
If the angle of rotation is reduced by more than 100°, a compressed air
leakage occurs due to the design. Turn the stop screw back to eliminate the
leakage that has occurred.
1
3
4
2
5
6
8
7
200°
100°
100°
