TECHNOPLAT CS/CW
TECHNOPLAT CS/CW TP
6.15. SWITCHING THE
MACHINE ON AND OFF
Proceed as indicated.
1.
Open the pneumatic tap
(C)
.
2.
Turn main switch
(A)
on
I
(ON) to turn on
electric power supply. Display reads
"RES"
.
3.
Press the "Reset" button
(B)
; the display
will enter stand-by mode.
4.
Set the cycle parameters (see “Cycle
parameter setting”).
5.
Perform the cycle start operations (see
“Starting and stopping the cycle”).
6.
Turn the main switch
(A)
to
0
(OFF) to
turn the machine off.
6.16. CYCLE PARAMETER SETTING
Proceed as indicated.
1.
Switch the machine on (see “Switching the machine on and off”).
2.
Choose the recipe number.
3.
Press the button relative to the parameter to be modified to view the current value.
4.
Press the keys
+ / −
, or scroll the slider, to raise or lower the value, until the desired value is obtained
(See “Programming window”).
This new value will be stored in the relative program.
6.17. WRAPPING CYCLES DESCRIPTION
6.17.1. DOUBLE WRAPPING CYCLE
The reel carriage moves off from the bottom of
the pallet and stops when it gets to the top, and
then comes back down to the bottom of the
pallet again, wrapping the load twice in doing
so.
1 ‒ START
3 ‒ STOP
61/79
