TECHNOPLAT CS/CW
TECHNOPLAT CS/CW TP
N)
Push-button: used to send the cutting arm backward.
O)
Push-button: used to move the rubber forward.
P)
Push-button: used to move the rubber backward.
Q)
Function disabled.
R)
Switch: to check the blower on the cutting arm.
S)
Switch: to check the blowers at the base.
6.5.1.MANUAL REINFORCEMENT FUNCTION
|
Important
It is not possible to carry out this function from layer recipes.
During the execution of a standard recipe, when the trolley is being lifted or lowered after carrying out the
wrapping at the base of the bench or at the top end of the pallet, it is possible to carry out the middle
wrapping manually by pressing the key
(A)
with two different procedures:
‒
Keep the key
(A)
pressed, the trolley
stops carrying out reinforcement turns
until the key is released.
‒
Repeatedly press the
(A)
key, the trolley
carries out as many reinforcement turns
as the number of times the key is
pressed (
1÷9
turns).
|
Important
The push-button is only visible when the machine is running in automatic mode.
54/79
