TECHNOPLAT CS/CW
TECHNOPLAT CS/CW TP
4.5.3. LOADING/UNLOADING RAMP ASSEMBLY (TP VERSION)
4.5.4. ASSEMBLY OF THE CUTTING UNIT/SEALING UNITS
4.5.5. ASSEMBLY OF THE PNEUMATIC PANEL
4.5.6. PNEUMATIC PRESSER ASSEMBLY (OPTIONAL)
4.5.7. ASSEMBLY OF THE MECHANICAL PRESSURE PLATEN (OPTIONAL)
4.6.
FASTENING THE MACHINE
4.7.
SETTING THE MACHINE INTO THE GROUND
4.8.
RECOMMENDATIONS FOR CONNECTIONS
4.9.
PNEUMATIC CONNECTIONS
4.10. ELECTRICAL CONNECTION
5.
INFORMATION ON ADJUSTMENTS
5.1.
RECOMMENDATIONS FOR ADJUSTMENTS
5.2.
ADJUSTING FILM "STRETCH"
5.2.1. "PDS" TYPE REEL CARRIAGES (REPLACE THE DRAWING GEARS)
5.3.
REEL CARRIAGE LIFTING CHAIN ADJUSTMENT
5.4.
TABLE ROTATION CHAIN ADJUSTMENT
5.5.
ADJUSTMENT OF TABLE GUIDE ROLLERS
5.6.
CLAMP CLOSING ADJUSTMENT
6.
ABOUT THE USE
6.1.
RECOMMENDATIONS FOR OPERATION AND USE
6.2.
CONTROL DESCRIPTION
6.3.
DESCRIPTION OF THE USER INTERFACE
6.3.1. NUMERIC AND ALPHANUMERIC KEYPAD
6.3.2. SCHEDULE WINDOW
6.4.
"HOME" SCREENSHOT
6.5.
"MANUAL HANDLING" SCREENSHOT
6.5.1. MANUAL REINFORCEMENT FUNCTION
6.6.
"RECIPES" SCREENSHOT
6.7.
"WRAPPING CYCLE" SCREENSHOT
6.8.
SCREENSHOT “GENERAL PARAMETERS”
6.9.
"PRODUCTION COUNTERS (PALLETS") SCREENSHOT
6.10. “H.M.I. SETTINGS” SCREEN
6.11. "PASSWORD MODIFICATION" SCREENSHOT
6.12. "PASSWORD INSERTION (USER LOGIN)" SCREENSHOT
6.13. "SERVICE" SCREENSHOT
6.14. PROGRAMMING A NEW RECIPE
6.15. SWITCHING THE MACHINE ON AND OFF
6.16. CYCLE PARAMETER SETTING
6.17. WRAPPING CYCLES DESCRIPTION
6.17.1. DOUBLE WRAPPING CYCLE
6.17.1.1. CYCLE WITH CUTTING DISABLED
6.17.1.2. CYCLE WITH SEALING DISABLED (CW VERSION ONLY)
6.17.2. WRAPPING CYCLE WITH FEEDER
6.18. STARTING AND STOPPING THE CYCLE
6.18.1. USE OF THE “START” CHAIN (OPTIONAL)
6.19. TYPES OF STOPPING AND STARTING
6.19.1. TEMPORARY STOP (VOLUNTARY)
6.19.2. MACHINE STOP DUE TO ELECTRICAL POWER CUT
6.19.3. PRODUCTION END STOP
6.19.4. EMERGENCY STOP AND RESTART
6.20. CHANGE THE PRESSER HEIGHT
6.20.1. ROD PNEUMATIC CYLINDER
3/79
