ScoopTeam - User manual - Draft 0002
49
4.3.9.
“Connection” page
Access level: Operator
This page is used for managing connections with remote devices.
The page includes the following areas and items:
1.
Status panel, as on the home page, including the audio level (send and receive) for the
Program
channel/line and the
Coordination
channel/line. Refer to chapter 4.5.1, Status panel for details
about the status panel.
2.
“Home” button: touch the button to switch back to the “Home” page.
3.
This area on the left side is dedicated to the management of the connections for Codec 1. This is
the only codec in the “single codec” mode, and it carries in this case both the
Program
channel
and the
Coordination
channel (when available, with dual mono coding). In the “double codec”
mode, this is the codec used for the
Program
transmission.
4.
“Connection pad” for codec 1: this area is both a call/release button and an information area for
the prepared or running connection. Touch the pad when the codec is idle (no running
connection), and the unit calls the destination that is preselected and displayed in the pad. If the
codec is on line, touch the pad and the unit hangs up (after confirmation). The color of the pad
also reflects the state of the connection. The detailed behaviour of this element is described
further in xxx, xxx.
5.
“Book” shortcut button: touch the button to call the menu, and go directly to the
Book
/
Call
Profiles
sub-menu. There you can pick up a call profile and load it (
NYA
). The loaded coding
profile and destination number/address are then shown in the connection pad, ready for
launching an outgoing call. You can find further (xxx) the detailed description of this branch in
the menu.
1
2
3
11
4
12
6
5
7
8
9
10
13
