40
ScoopTeam - User manual - Draft 0002
4.
Switches for activating or defeating the features selectable on the input channels: microphone
phantom power (except input 4), input limiter, mic/line switch (only inputs 3 and 4 can be set
for line level), and high-pass filter (the high-pass filter is always active on inputs 1 and 2, thus no
switch is shown). Touch a switch to toggle the feature active/disabled.
5.
Routing switches: on each input channel:
- A virtual switch selects the signal for sending to the
Program
bus; touch the switch to toggle it
on/off (
note that this is the same as pressing the input’s dedicated PGM key on the control
panel
).
- Another virtual switch selects the signal for sending to the
Coordination
bus (Coord.); touch
the switch to toggle it on/off.
This is
not
the same as pressing the input’s dedicated Coord key on
the control panel. Here the switch is static, i.e. when active it
permanently
sends the signal to
the Coordination bus, and the dedicated Coord button on the control panel has no effect.
6.
“Input Settings” button: this button has a black background to remind that this is the current
page.
7.
“Aux Settings” button: touch the button to go to the “Aux Settings” page, described in the
following (“Aux Settings” page).
8.
“Output Settings” button: touch the button to go to the “Output Settings” page, described in
the following (“Output Settings” page).
9.
“Back” button: touch the button to come back to the “Mixing” page.
You can hit one of the two shortcut keys (lower part of the control panel) and access respectively the
“Monitoring” pages, or the “Connection” page.
