20
ScoopTeam - User manual - Draft 0002
2.5.6. Assignable function keys
Each assignable backlit function key can be assigned a function among the following categories.
Cough key n
When this function is assigned, pushing the key mutes the microphone input n (n=1 to 4).
The action is “temporary” (the microphone comes back to its previous state when the key is released).
The backlight is on while the button is pressed.
Talk to speaker
This function allows the signal from the commentary position i (i=1 to 4) to be sent to the headphone of
the commentary position j (j=1 to 4, but j≠i). The signal is mixed over the current mix on headphone j,
while the other sources are dimmed by 12 dB. Conversely, the signal is removed from the Program mix
bus, even if it is active in the current settings.
The action is “temporary” (come back to the previous state when the key is released).
The backlight is on while the button is pressed.
Talk to output (
NYA
)
This function allows the signal from the commentary position i (i=1 to 4) to be sent to an audio output of
the ScoopTeam. The signal is mixed over the current mix on the selected output.
The action is “temporary” (come back to the previous state when the key is released).
The backlight is on while the button is pressed.
Reminder: the possible (mono) outputs are: line output, USB audio output, Ravenna output stream
(channel 1), Ravenna output stream (channel 2).
Aux to Bus (
NYA
)
This function allows to insert/mix one of the auxiliary inputs into the Program mix bus, or into the
Coordination mix bus.
The button acts in a “toggle” mode (switch on/off each time the button is pressed).
The backlight is on when the mix is enabled.
Reminder: the possible (mono) auxiliary inputs are: USB input, line 1 input, line 2 input, AES input
(channel 1), AES input (channel 2), Ravenna input stream (channel 1), Ravenna input stream (channel 2).
Contacts (
NYA
)
This function allows to set on/off the “Contact” n (n=1 or 2) sent to the remote destination during the
transmission, and/or show its current state.
The button acts in a “toggle” mode (switch on/off each time the button is pressed).
It is not active if the
contact has been assigned to a GPI.
The backlight reflects the state of the “Contact”.
INFO (
NYA
)
This function allows to show the current state on/off of “INFO” n (n=1 or 2).
The button is unused in this assignment.
The backlight reflects the state of the “INFO”.
Shortcuts (
NYA
)
This function allows to go directly to a specific page or menu branch of the user interface.
The backlight is unused with such key assignment.
