60
ScoopTeam - User manual - Draft 0002
4.5. Details on specific objects
4.5.1. Status panel
Layout
The status panel is an area on the top of the screen, visible on most pages of the user interface.
1.
SIP registration status for the Account n°1 / Program line (on the picture: registered)
2.
Current network interface information: type, and additional info (on the picture: mobile, and
radio signal strength meter)
3.
Network interface connection status (on the picture: mobile data connection active and OK)
4.
Program line/connection state (on the picture: link established)
5.
Coordination line/ connection state (on the picture: link idle)
6.
SIP registration status for the Account n°2 / Coordination line (on the picture: not registered)
7.
IP transmission quality for the programme connection
8.
Audio level (send and receive) for the
Program
channel/line: PPM, ref 0 dBFS
9.
Audio level (send and receive) for the
Coordination
channel/line.
10.
IP transmission quality for the coordination connection (here irrelevant, as the link is idle)
The above applies to the double codec configuration (or single codec + mobile voice, case 4 in 4.4.1). In
the single codec case, the panel has the following layout:
The “Program” and “Coord” status indicators are merged, because if a coordination channel is
transmitted, this is done at the same time as the program channel, inside the same (dual mono)
connection.
The following describes more details about the various indicators found in the status panel.
1
2
5
8
7
10
3
4
6
9
