13
MAINTENANCE
REPLACING THE HEPA/ACTIVATED CARBON FILTER
WARNING:
Cleaning the HEPA/Activated Carbon Filter with water will damage the filter
and require the purchase of a replacement.
Depending upon usage and environment, we recommend you change the HEPA/Activated
Carbon Filter each season but no less than once every 8 months. The unit will keep track of how
•
Open the front panel by pulling it gently forward at the edges
•
Carefully remove the washable Pre-Filter and gently vacuum dirt and debris if needed.
•
Remove the HEPA/Activated Carbon Filter and replace with a new HEPA Filter
(Replacement Part #49892).
•
Replace the washable Pre-Filter and snap back into place.
•
Replace front panel.
•
After the HEPA/Activated Carbon Filter is replaced, press the Filter Timer to reset.
CLEANING THE EXTERIOR SURFACE
Wipe clean regularly with a moist cloth and mild household detergent. Do not splash water
CLEANING THE WATER BUCKET
The water bucket should be cleaned regularly to prevent the growth of mold, mildew and
bacteria. Clean water bucket with warm soapy water, rinse and dry thoroughly before
NOTE:
changed more often due to higher amounts of dust, humidity, or chemicals found
Pure & Dry HEPA Dehumidifier
in your ambient air. Additionally, people who are more sensitive to these airborne
!
Summary of Contents for Pure & Dry
Page 19: ...19...
