12
WATER REMOVAL (
CONTINUED)
Up
Before
After
Drainage Hose Connected
Pry Up
Step Three:
Take out the water tank and push aside the water
outlet pressure plate.
Step Four:
Connect the Drainage Hose
with suitable length to the
drain port (insert about 10 mm).
See following page for more
information.
Step Five:
Insert the other end of the
Drainage Hose into a floor drain,
making sure that the hose is not
twisted, folded, kinked, looped, etc.
NOTE:
In order to avoid water leakage, please ensure
the Drainage Hose is firmly connected and fully
inserted before use. Pitch Drainage Hose slightly
downward for proper water drainage.
＞
10CM
LENGTH OF DRAINAGE HOSE
NOTE:
• The Drainage Hose should be as short as possible (the recommended length is less
than 0.6 meters)
• The difference in height between the end of the Drainage Hose and outfall must be
above 10 cm.
• The Drainage Hose should be unobstructed, otherwise it will not drain
water successfully
WARNING: The Drainage Hose must be installed correctly as leakage can occur
and/or water fills up the bucket instead of draining correctly.
!
Summary of Contents for Pure & Dry
Page 19: ...19...
