43
10.
Draw a rectangle around the exhaust stack lo-
cations and cut it out with a hobby knife.
11.
Pull up the template to the engine cylinder
head and muffler can. Trace around the en-
gine cylinder and muffler can so that they can
extend below the template after the tracing is
cut out.
12.
Remove the template and cut out the tracing
with a hobby knife.
13.
With template centered and flush with rear of
cowl tape the template to the cowling. Cut the
template to clear the air intake on the bottom
of the cowl and allow the template to lay flat
against the bottom of the cowl.
