68
4.
Install the fuel tubing as shown with small ny-
lon ties. You will need an after market fuel T
and fuel filling dot.
Note: We recommend
looping the vent line to the rear of the fuel
tank as shown to prevent fuel spilling when
the model tail is lifted or flying a down line.
5.
Install the fuel filling dot as desired on the side
of the fuse. Do not allow the fuel dot to inter-
fere with the leading edge of the wing. Secure
the fuel vent line to the front former for proper
draining. Drill a fuel line hole in the bottom of
the engine box floor to allow fuel pick up line
to connect the engine carburetor fuel intake
nipple.
Ignition Installation
1.
Gather the engine ignition parts as shown be-
low. Engine ignition, nylon ties, and foam
rubber.
2.
Locate the plywood ignition mounting bracket
as shown.
