11
9.
Aileron servo mounted in bottom of wing.
Aileron Control Linkage Installation
1.
Gather the aileron control linkage parts as
shown below. There is 1 pushrod, 2 ball link
assemblies, 1 left and 1 right side control horn,
and 6 wood screws for each wing panel.
2.
Assemble the pushrod and control horn assem-
bly as shown. The ball link goes between the
left and right sides of the control horn sides
and is secured with a nylon lock nut. Start
with the center hole in the control horn. The
ball link may be moved up or down for more
or less control throw.
3.
Use a ruler against the outboard side of the
servo case to project a line to the leading edge
of the aileron and mark as shown.
