23
11.
Attach a metal threaded RC link to each
threaded coupler. Attach the RC links to the
rudder servo arm and then attach the servo arm
to the rudder servo as shown. A 2 3/4” to 3”
arm is recommended.
Rudder Control Horn Installation
1.
Gather the rudder control horn parts as shown
below. 2 ball link assemblies and 2 left and 2
right side control horns. Assemble the ball
links between the control horns as shown.
Secure with nylon lock nut.
2.
Measure up from the bottom of the rudder 1
1/4” and place a mark on the rudder leading
edge.
3.
Center the rudder control horn over the mark
and mark the locations of the control horn
mounting holes.
