7
#10:
(4) Wooden servo mounting tray for throttle and
choke servos
(2) Engine mounting template (DA150/170 and
Universal)
(1) Plywood Stand off for DA150/170
(2) 80mm I.D. hole - MTWTD110 Canister brackets
with (4) 4-40x10mm hex head bolts and (4) #3 flat
washers
(2)70mm I.D. hole - MTWRE3 Pipe brackets with
(4) 4-40x10mm hex head bolts
(4) #3 flat washers
(16) Silicon tubes
(2) 58mm I.D. hole - Greves Pipe brackets with
(4) 4-40x10mm hex head bolts
(4) #3 flat washers
(16) Silicon tubes
(1) Bottom Hatch Cover for Long Pipe
(1) 180x120x6mm foam for the fuel tank.
(1) 160x100x6mm foam for the fuel tank
(3) 300x80x8mm sponge for the receiver and battery
(8) 4.5x500mm Nylon ties
(10) 3x150mm Nylon ties
(6) 12.5x356mm Velcro
(6) Rubber grommets – fuel line and wire guide
(1) 16mm dia. Aluminum Insert
(1) 9-1/2”x11” card stock for cutting cowling
#11:
(1) 300x300 White Covering
(1) 300x300 Cub Yellow Covering
(1) 300x300mm Pearl Blue Covering
(1) 20x2100mm transparent covering – Sealing hinge
gaps
OR
(1) 300x300 White Covering
(1) 300x300 True Red Covering
(1) 300x300mm Black Covering
(1) 20x2100mm transparent covering – Sealing hinge
gaps
#12:
(24) 6mm aluminum engine stand offs.
#13:
(1) Customer Throw Meter
(1) Paper Degree Meter for Rudder
#14:
(1) Custom – Vinyl Decal Set
#15:
(1) Assembly Manual with picture folders on CD
