29
Tail Wheel Installation
1. Tape the rudder balance tab to the top leading
edge of the vertical fin in the neutral position as
shown. This ensures the rudder is straight when
the tail wheel steering springs are installed.
2. Gather the tail wheel parts shown below.
◊
1 - Carbon tail wheel assembly
◊
3 - Tail wheel mounting screws
◊
1 - Steering tiller
◊
2 - Tiller mounting screws
◊
2 - Steering springs
3. Place tail wheel steering tiller over the pre-
drilled holes in the bottom of the rudder.
4. Apply a drop of thick CA to the mounting
screws before inserting into the tiller mounting
holes.
