69
5. Gather the Smart-Fly pin and flag switch as
shown below. The switch mount shown will
need to be constructed using (2) 1/4” square
hardwood blocks and a 1/8” thick piece of ply-
wood.
Note:
Wood not supplied.
6. Mount the pin switch to the switch mount as
shown below.
7. Mount the switch mount to the inside of the fuse
using thick CA as shown below.
8. Drill a small hole through the side of the fuse for
the pin switch to pass through as shown. Use a
brass servo eyelet in the hole to keep it from get-
ting larger over time.
