68
1. Gather the supplied mounting hardware to be
used. Included in the kit are large and small ny-
lon ties, One Wrap Velcro ties, and foam rubber
pads as shown.
3. Using the 4 servo mounting screws mount the
EQ-6 to (2) 1/4 x 1/4 x 3” pieces of hardwood as
shown below.
2. Gather the Smart-Fly Power System components
as shown below.
◊
1 - EQ-6 Turbo
◊
2 - Radio batteries (2x 5200mah Li-ion
Recommended)
◊
1 - Smart-Fly Pin and Flag Switch
◊
1 - Receiver mounting Velcro
◊
4 - Servo Mounting Screws (Micro Fastener
Part number
STW0209
recommended)
4. Use 5 minute epoxy to secure the mounting rails
to the radio floor of the fuse as shown.
RADIO INSTALLATION
