Aerotech BL 10-40, Hardware Manual

Page: 18 / 68

BL Installation and Configuration
2.1. Safety Procedures and Warnings
The following statements apply wherever the Warning or Danger symbol appears within this manual. Failure
to observe these precautions could result in serious injury to those individuals performing the procedures
and/or damage to the equipment. Operators should be trained before operating this equipment.
N OT E : The BL (all Aerotech equipment) is not to be used in a manner not specified by Aerotech, Inc.
To minimize the possibility of bodily injury and electrical shock, make certain that electrical
power is disconnected (Mains disconnect) from amplifier before performing system maintenance
or wiring.
Risk of injury during operation due to moving parts connected to the BL.
Residual voltages greater than 60V can be present inside and at the terminals of the BL amplifier
for longer than 5 seconds after power has been disconnected.
All service and maintenance must be performed by qualified personnel.
Improper operation of this equipment may result in personal injury. The user must read this man-
ual and related documentation thoroughly before operating the equipment.
Use of this product in a manner other than its intended use may result in bodily injury and/or dam-
age to the equipment.
The BL case temperature may exceed 75°C in some applications.
N OT E : All drawings and illustrations are for reference only and were complete and accurate as of this
manual’s release. The most recent system drawings and schematics can be found on your software CD
ROM.
8 Chapter 2 www.aerotech.com