![background image](http://html.mh-extra.com/html/aeroqual/series-300/series-300_user-manual_2862858018.webp)
17
4.9 Setting the Control Points
To enter the Control menu press
.
Setting the Control High
After entering the Control Points menu, the „Control Hi
‟
display
will appear.
Press
or
to increase or decrease the setting
Press
to confirm change.
Setting the Control Low
Once the change has been confirmed, the cursor will automati-
cally scroll to the „Control
Lo
‟
display.
Press
or
to increase or decrease the setting
Press
to confirm the change.
Press
to scroll down to the next Menu choice
Note:
Once the control settings have been set the monitor must
be either put into “Standby” or switched off for the new settings to
become effective. Once the monitor is put back into normal oper-
ating mode the new settings will become effective.
CONTROL HI
0.080 ppm
CONTROL LO
0.040 ppm