![background image](http://html.mh-extra.com/html/aeroqual/series-300/series-300_user-manual_2862858023.webp)
10.
The conversion factor for the unit of measurement [parts per
million (ppm)] or [milligrams per cubic metre (mg/m
3
)] can be
changed on S300 and S500 monitors as well as the tem-
perature unit (ºC or ºF) on S305 and S505 monitors.
11.
Data that is logged onto the Series 500 and 505 monitor can
be downloaded to a personal computer using the Aeroqual
software provided.
12.
Data from different Aeroqual sensor heads can be saved in
the same database. However, the data from each sensor
head has to be downloaded separately – see Setting Data
Logging Functions on page 31.
13.
Monitor version V5.0 and above are not compatible with pre-
vious versions of software.
System requirements:
Operating system:
Windows™ 2000, XP.
Processor:
600MHZ or above recommended
RAM:
256MB (minimum)
Disk space:
90MB (minimum)
Communications Port:
Serial (or USB-to-serial adaptor)
CD-ROM Files:
S500 – x– x . exe
The Aeroqual Monitor software Windows installation file.
Installation of the Software:
Step 1:
Insert CD-ROM into CD driver
Step 2:
Browse CD-ROM and double click the installation file
“S500 –x– x . exe”, and then follow the instruction wizard
until finished.
(For Windows Vista, unzip the Vista software which
should then self-install).
Running the Software Program
Connect the Aeroqual Series 500 or 505 monitor to the COM port of
your computer using the cable supplied (The default COM port setting is
COM1. If COM2 is to be used, the COM port setting will need to be con-
figured. Refer to page 29 “Configuration”). Turn the monitor on.
Start the program by either:-
Selecting
Start -> Programs -> Aeroqual -> S500 Vx.x
or:-
if the program shortcut has been placed on desktop, by double
clicking the shortcut.