![background image](http://html.mh-extra.com/html/aeroqual/series-300/series-300_user-manual_2862858004.webp)
3
1. Monitor Components
Series 300 and 305 Monitor
The following components are supplied with the Series 300 and 305
Monitor:
Series 300 or 305* monitor base
Sensor head
12 VDC AC/DC adaptor or Lithium Smart Charger
User guide
Battery pack – 9.6V Ni-MH or 11.1V Lithium Polymer
Series 500 and 505 Monitor
The following components are supplied with the Series 500 and 505
Monitor:
Series 500 or 505* monitor base
Sensor head
Data logging software on CD
Serial cable and USB to Serial adapter (with instructions)
12 VDC AC/DC adaptor or Lithium Smart Charger
User guide
Battery pack – 9.6V Ni-MH or 11.1V Lithium Polymer
*
Series 305 and 505 monitor base is supplied with a separate temperature and
relative humidity probe that is plugged in as shown below.
Please check that all these components have been supplied and contact
your dealer or Aeroqual on email at:
if any of the com-
ponents are missing.
Replacements
Replacement batteries, sensor heads and other accessories can be pur-
chased separately.
Note:
All sensors deteriorate over time. It will be necessary to replace your sensor
head with either a new or refurbished head. This must be done on a sched-
uled basis or when the “sensor aging” or sensor failure” diagnostic appears.
Bump tests, zero and span calibration can be performed under specified
conditions with appropriate tools.