Aeropro CZ A220, Maintenance Manual

Page: 59 / 158

Maintenance Manual
AEROPRO CZ 6-6
Maintenance Manual
March 21, 2020
6.16 Repair
Repair is limited to replacing the copper bushings or hinge bolts and restoring dents or smaller
cracks on edges. Since ailerons are designed as a sandwich construction, it is strongly recommended to
replace or return to factory for repair, if significant damage is detected on the aileron structure.
6.17 Rigging
6.17.1 Required Tools: 10 & 13 mm wrench, screwdriver, Jig for adjustment
6.17.2 Parts required: Safety wire, self-locking nuts as required.
6.17.3 Level of Maintenance:
Heavy
6.17.4 Certification required: A&P Mechanic or LSA Repairman Maintenance
a. For the flaperon control levers to apply the correct range of input but will stabilize in the neutral
position, (pattern see figure 6-2) ensure the control stick and wing flap lever are both set to the
neutral position before completing the rig.
b. Gradually set the length of the rods from the control stick casing up to the rods linked to the
ailerons ensuring that both the aileron and control stock are in the neutral position before
completing the rig.
c. Check the maximum deflections of the ailerons and flaperons to make sure the correct range of
movement can be reached for both the controls. (per wing/flaperon drawing below).