Aeropro CZ A220, Maintenance Manual

Page: 81 / 158

Maintenance Manual
AEROPRO CZ 10-10
Maintenance Manual
March 21, 2020
10.13 Installation (refer to figure 10-3.)
10.13.1 Required Tools: Refer to paragraph 10.8
10.13.2 Parts required: Various self-locking nuts, cable ties, hose clamps,
safety wire (1.0 mm).
10.13.3 Level of Maintenance: Heavy
10.13.4 Certification required: Rotax-certified technician
Before installing the engine on the aircraft, install any items that were removed from the engine
after it was removed from the aircraft.
Figure 10-3
1. Gearbox
2. Engine Rotax 912ULS
3. Carburetors
4. Starter
5. Oil filter
6. Engine mount M12
7. Engine shock absorber
8. Holder for shock absorber
9. Socket head screws M8x80/10.9
10. Rubber chock mount pads
11. Collar bush
12. Shaped washer
13. Shelf-locking nut M8
a. Hoist engine assembly at the inlet manifold on top of the engine.
b. Install engine to the engine mount using M12 screws (refer to N.6 figure 10-3)
Note
Remove all protective covers, plugs, caps and identification tags as each item is
connected or installed.