aero-naut Canadair CL-415, Building Instructions

Page: 11 / 13

Canadair CL-415
11
Part Description No. Material Size in mm
No. off
44 Tailplane trailing edge sheeting 2 Balsa 65 x 1.5 mm, as plan
45 Tailplane false leading edge 1 Balsa 7 x 3 mm, as plan
46 Tailplane leading edge sheeting 2 Balsa 37 x 1.5 mm, as plan
47 Tailplane leading edge 1 Balsa Ready made
48 Tailplane tip block 2 Balsa Ready made
49 Elevator lining strip 1 Balsa 13 x 3 mm, as plan
50 Tailplane capstrip Balsa 6 x 1.5 mm, as plan
51 Sheeting Balsa 1.5 mm, as plan
53 Wing main spar 2 Balsa Ready made
54 Wing secondary spar 2 Balsa Ready made
55 Wing trailing edge sheeting 4 Balsa Ready made
56 Wing rib 24 Balsa 2 mm, die-cut
57 Wing rib 4 Plywood 3 mm, die-cut
58 Wing half-rib 2 Balsa 2 mm, die-cut
59 In-fill piece 1 Balsa Ready made
60 Aileron horn block Balsa 24 x 15 mm, as plan
61 Wing leading edge sheeting 4 Balsa 50 x 1.5 mm, as plan
62 Dihedral brace 1 2 Plywood 1.2 mm, die-cut
63 Dihedral brace 2 2 Plywood 1.2 mm, die-cut
64 Servo support 4 Balsa 2 mm, die-cut
65 Servo mount 2 Plywood 1.2 mm, die-cut
66 Wingtip reinforcement 4 Plywood 3 mm, die-cut
67 Wingtip reinforcement 4 Plywood 3 mm, die-cut
68 Wingtip reinforcement 2 Plywood 3 mm, die-cut
69 Wingtip reinforcement 2 Plywood 3 mm, die-cut
70 False leading edge 2 Balsa 10 x 3 mm, as plan
71 Wing leading edge 2 Balsa Ready made
72 Tapered strip (wingtip) 2 Balsa Ready made
73 Aileron lining strip 4 Balsa 15 x 3 mm, as plan
74 Winglet 2 Plywood 3 mm, die-cut
75 Float cladding Balsa 3 mm, as plan
76 Float pylon 2 Plywood 3 mm, die-cut
77 Float rib 2 Plywood 3 mm, die-cut
78 Float 2 + 2 Plastic Ready made
79 Motor nacelle 2 GRP Ready made
80 Motor bulkhead 4 Plywood 3 mm, die-cut
81 Hardwood strip Spruce 5 x 2 mm, as plan
82 Nacelle bulkhead 2 Plywood 3 mm, die-cut
83 Cross-piece 1 2 Plywood 3 mm, die-cut
84 Cross-piece 2 2 Plywood 3 mm, die-cut
85 Gusset 2 Plywood 3 mm, die-cut
86 Fairing 2 Plastic Ready made
87 Fairing 2 Plastic Ready made
88 Dowel Beech 5 mm Ø, as plan
89 Oil cooler 2 Plastic Ready made
90 Dummy flap mounting 8 + 8 Plastic Ready made
91 Motor fairing 2 GRP Ready made
92 Finlet 2 GRP Ready made
93 Half-rib 2 Plywood 3 mm, die-cut
94 Round glazing panel 2 Plastic Ready made
95 Support plate 1 Plywood 3 mm, die-cut
96 Metal rudder hinge sleeve 1 Aluminium 2 / 1.6 Ø, overlength
Tapered jig strip 1 Balsa 1000 x 3 x 12 mm
Jig strip 1 Balsa 1000 x 5 x 10 mm
Tapered jig strip 2 Balsa 1000 x 5 x 5 mm
Self-tapping screw 8 Steel 2.2 Ø x 6.5 mm
Self-tapping screw 8 Steel 2.2 Ø x 9.5 mm
Cheesehead screw 6 Brass M2.5 x 18 mm
Cheesehead screw 10 Brass M2 x 12 mm
Cheesehead screw 5 Brass M2 x 20 mm