Operator’s Manual
GTWY SERIES 18
Tilt-back Operation Instructions
Tilt-back Operation Instructions
Observe and obey:
□ The retaining pin must be inserted to prevent
the spring-loaded tilt-back frame from dropping.
□ Do not tilt the machine back unless the area
is clear of personnel and obstructions.
□ Do not stand behind or under the tilt-back
frame when raising or lowering it.
Tilt-back Frame
The GTWY Series has a tilt-back frame when
height over 2m, which allows the machine to roll
through a standard doorway.
The tilt-back frame is standard equipment on
standard base GTWY1-12 models, and optional
on standard base lower than GTWY1-12.
