Operator’s Manual
GTWY SERIES 20
Tilt-back Operation Instructions
Stowing the Tilt-back Assembly
1 Remove the retaining pin.
2 Firmly grasp the tilt-back frame and remove
the tilt-back strut from the strut socket.
3 Lift the tilt-back frame, hold in an upright
position against the spring and secure with the
retaining pin.
Returning the Machine to
Standing Position
1 Be sure the area below the machine base
and T-handle is clear of personnel and
obstructions.
2 Slide out the T-handle until the lock pin
snaps into place.
3 Carefully pull down
the T-handle until the
machine rests at
midtilt position.
4 Lower the machine with the T-handle until
the base casters are in contact with the ground.
Use the appropriate number of people and
proper lifting techniques.
5 Return the sliding T-handle to the stowed
position.
