AEREX 0040.0420, Operation And Maintenance Instructions

Page: 24 / 56

24 www.aerex.de
Reco-Boxx ZXR / ZXA / Flat – Operation and maintenance instructions [03/ 2021]
7.1.3 Basic setup
When the air handling unit is started up for the first time,
the commissioning menu is automatically displayed. At
the very end of the commissioning (menu) the commis-
sioning of the unit has to be confirmed by the service
technician. Once the commissioning has been confirmed,
the commissioning menu will not be displayed as first
menu any more. The commissioning menu, however,
will remain accessible through the advanced setup.
See Section 7.1.4.
Language
The language desired can be set here. The language set-
ting can be changed at any time in the basic setup menu.
Setting Settings range Factory setting
Language Languages as
displayed English
Units
The desired unit can be set here. The unit setting can be
changed at any time in the basic setup menu.
Setting Settings range Factory setting
Unit m³/h
l/s m³/h
Betriebsmodus Luftvolumenstrom
The desired control mode can be set here. The setting
can be changed at any time in the basic setup menu.
Depending on the selected function, flows can be set
as (l/s, m³/h), pressure (Pa), input signal strenght (%) or
torque (%). For both “Airflow control” and “Torque con-
trol”, three setpoints are available: Low, medium and high.
Setting Settings range Factory setting
Operating mode OFF
Airflow
Demand control
Pressure
Torque Airflow