![background image](http://html.mh-extra.com/html/aerco/gf-146-ir/gf-146-ir_installation-operation-maitenance-manual_2861566017.webp)
AMR Integrated Water Heaters (Supplement to GF-146)
CHAPTER 3: INSTALLATION - SITE
3.10 Transporting the Water Heater
After removing the shipping carton from the unit, it may be moved as described in next section.
Transport the water heater to its installation location as follows.
Transporting the Water Heater
1. Remove the lower and upper covers “A” at front of the AM unit by pulling them off.
2. Remove the six screws (B) to remove cover plate (C) to access and remove the two screws
(D) from the floor of the unit fastening the unit front to the pallet. Replace all covers.
Figure 3-2: Removing the Front from Wood Pallet
3. Remove two screws (E) from the shipping brackets to remove unit from pallet rear.
Figure 3-3: Removing the Rear from Wood Pallet
4. Install the two factory supplied eyebolts “F” on the upper side of the unit and attach chains
or straps to lifting ring/hook “G”.
Figure 3-4: Removing the Unit from Wood Pallet (Lifting)
G
E
F
A
B
C
D
OMM-0106_0A
AERCO International, Inc.
•
100 Oritani Dr.
•
Blauvelt, NY 10913
Page
17
of
52
GF-146-IR
Ph.: 800-526-0288
PRI - 07/22/15