AMR Integrated Water Heaters (Supplement to GF-146)
CHAPTER 3: INSTALLATION - SITE
WARNING!
Do not store or use gasoline or other flammable vapors
or liquids in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
•
Do not try to light any appliance.
•
Do not touch any electrical switch.
•
Do not use any phone in the building.
•
Immediately call your gas supplier from a neighbor’s
phone. Follow the gas supplier’s instructions.
•
If you cannot contact your gas supplier, call the fire
department.
3.2 Water Heater Installation Location Factors
When locating the water heater, the following factors must be considered:
•
location of vent/air intakes;
•
connection to the gas supply;
•
connection to the water supply;
•
connection to the heating system;
•
connection to the electrical supply;
•
disposal of the condensation produced by the water heater;
•
connection to the room thermostat, building automation system, or equivalent device;
•
piping of the safety relief valve discharge;
•
connection of the outdoor temperature sensor;
•
possible connection of an indirect water heater;
•
If flooding is possible, elevate the water heater sufficiently to prevent water from reaching
the unit;
•
The location of vent/air intakes;
•
connection to the gas supply;
•
connection to the water supply;
•
connection to the electrical supply;
•
disposal of the condensation produced by the water heater;
•
piping of the safety relief valve discharge;
•
connection of a storage tank;
•
If flooding is possible, elevate the water heater sufficiently to prevent water from reaching
the unit;
Page
14
of
52
AERCO International, Inc.
•
100 Oritani Dr.
•
Blauvelt, NY 10913
OMM-0106_0A
PRI - 07/22/15
Ph.: 800-526-0288
GF-146-IR
