![background image](http://html.mh-extra.com/html/aerco/gf-146-ir/gf-146-ir_installation-operation-maitenance-manual_2861566036.webp)
AMR Integrated Water Heaters (Supplement to GF-146)
CHAPTER 10 – MAINTENANCE
10.3.2 Buffer Tank Anode Rods
The buffer tank anode, located as shown in Figure 10-14, should be checked every six months,
and replaced once a year.
Figure 10-14: Buffer Tank Anode Location and Diameter Inspection
At the 6 month inspection, unscrew the anode from its port and check the reduction in anode
diameter. Original anode rod diameter is 3/4” (0.75”), and anode should be replaced if diameter
is reduced by 20% to 3/5” (0.60”) diameter or less. Figure 10-14 shows a comparison of an old
anode needing replacement, and a new anode.
Contact AERCO Technical Support for replacement anodes.
NEW
ANODE ROD
(3/4” DIAMETER)
OLD
ANODE ROD NEEDING
REPLACEMENT DUE TO
EXCESSIVE DIAMETER
REDUCTION
Anode
FRONT VIEW – COVERS OFF
Page
36
of
52
AERCO International, Inc.
•
100 Oritani Dr.
•
Blauvelt, NY 10913
OMM-0106_0A
PRI - 07/22/15
Ph.: 800-526-0288
GF-146-IR