AEP Networks ATAG VA4511AT, User Manual

Page: 34 / 67

- 34 -
10.2001 A. B. 599 51 21 26 EN
4.7 Rinse-Aid Addition
T1
EIN
AU S
T2 T3 T4 T5 T6 T7 T8 T9
EIN
AU S
T1 T4 T7
T2 T5 T8
T3 T6 T9
EIN AUS
T2 T3 T4 T5
T6 T7
Key layout, vertically
Key layout, horizontally
Key layout, VGA
General information
- Deactivating resp. activating the rinse-aid addition is executed analogously in all designs resp. key
layouts.
- For that you always have to use keys T1 to T4, independent of their model-relevant cycle load.
- The display whether the rinse-aid addition is active or not, is indicated differently depending on the
model, i.e. with or without 7-segment display (VGA).
Valid generally:
- Key 4 is the “rinse-aid key”.
- By the factory, the rinse-aid addition is active.
General explanation regarding LED key T5*:
- This key LED lights or flashes only when the function was programmed depending on model. If
there is no adjusted function specifically for the appliance, the corresponding LED is switched off in
the “service functions” mode.